YEAR: 2003
MAKE: HYSTER
MODEL: H110XM
11000LB CAPACITY
3 STAGE MAST
94″ LOWERED HEIGHT
185″ RAISED
PERKINS ENGINE
DIESEL FUEL
PNEUMATIC TIRES
SIDE SHIFT
FORK POSITIONER
48″ FORKS
$24900
YEAR: 2004
MAKE: LINDE
MODEL: H30D
6000LB CAPACITY
3 STAGE MAST
85″ LOWERED
187″ RAISED
VW ENGINE
DIESEL FUEL
SOLID PNEUMATIC TIRES
SIDE SHIFTER
FORK POSITIONER
42″ FORKS
$16900
FOR MORE INFORMATION CONTACT OUR OFFICE TOLL FREE AT 888-745-0577
YEAR: 2006
MAKE: HYSTER
MODEL: H120XM
12000LB CAPACITY
2 STAGE MAST
119″ LOWERED
179″ RAISED
LPG FUEL
GM VORTEC 4.3L V6 ENGINE
SOLID PNEUMATIC TIRES
FULL CAB WITH HEAT, WIPERS, LIGHTS, AIR CONDITIONING (NOT FUNCTIONING)
SIDE SHIFTER ADDITIONAL
4 WAY HYDRAULICS
48″ FORKS INCLUDED
ORIGINAL PAINT (ADD $2000 FOR PAINT IF NEEDED)
$23900
FOR MORE INFORMATION CONTACT OUR OFFICE TOLL FREE AT 888-745-0577.
MAKE: SKYJACK
MODEL: SJ9250
56’ WORK HEIGHT
50’ DECK HEIGHT
ELECTRIC PLATFORM EXTENSION
FORD DUAL FUEL ENGINE (RUNS ON LPG OR GASOLINE)
4X4
PNEUMATIC ROUGH TERRAIN TIRES
1500LB CAPACITY
STABILIZERS
2047 HOURS
$12900
FOR MORE INFORMATION PLEASE CONTACT OUR OFFICE TOLL FREE AT 888-745-0577.
YEAR: 2010
MAKE: NISSAN
MODEL: CF50
5000LB CAPACITY
3 STAGE MAST
83″ LOWERED
187″ RAISED
LPG FUEL
NISSAN ENGINE
CUSHION TIRES
SIDE SHIFTER
48″ FORKS INCLUDED
FOR MORE INFORMATION PLEASE CALL OUR OFFICE TOLL FREE AT 888-745-0577.
YEAR: 2001
MAKE: KOMATSU
MODEL: FG25C-12
5000LB CAPACITY
3 STAGE MAST
83″ LOWERED
189″ RAISED
NISSAN ENGINE
LPG FUEL
PNEUMATIC TIRES
SIDE SHIFTER
48″ FORKS
$12900
THREE UNITS AVAILABLE
FOR MORE INFORMATION PLEASE CONTACT OUR OFFICE TOLL FREE AT 888-745-0577.
3500LB CAPACITY
3 STAGE MAST
83″ LOWERED
189″ RAISED
LPG FUEL
MITSUBISHI ENGINE
PNEUMATIC TIRES
SIDE SHIFTER
48″ FORKS
2 UNITS AVAILABLE
$11900
For more information please contact our office at 888-745-0577.
10000LB CAPACITY
3 STAGE MAST
88″ LOWERED
178″ RAISED
LPG FUEL
GM 4.3L V6 ENGINE
SMOOTH CUSHION NON MARKING TIRES
4 WAY
SIDE SHIFTER
FORK POSITIONER
48″ FORKS
FOR MORE INFORMATION CALL US TOLL FREE AT 888-745-0577
YEAR: 2008
MAKE: HYSTER
MODEL: E50Z-27
5000LB CAPACITY
3 STAGE MAST
83 LOWERED
189 RAISED
36V BATTERY
27 COMPACT BATTERY CASE
SMOOTH CUSHION NON MARKING TIRES
4 WAY PLUMBED HYDRAULICS
SIDE SHIFTER INCLUDED
48 FORKS
$10900
2002 JLG 600S on Sale in Wisconsin! Get a great deal on a great lift!
4×4
FOUR WHEEL STEERING WITH 360 DEGREE TURN RADIUS
60 PLATFORM HEIGHT
66 WORK HEIGHT
96 WIDE BASKET
500LB CAPACITY
DEUTZ DIESEL ENGINE
PNEUMATIC ROUGH TERRAIN TIRES
Questions or looking for another type of forklift boom lift scissor lift or basically ANY commercial equipment NEW or USED?
We now sell BRAND NEW VIPER FORKLIFTS! Call us today at 888-745-0577!
Direct Link: http://www.illinoislift.com/2002-jlg-600s-c-150.htm?
2002 JLG 600S
YEAR: 2010
MAKE: DOOSAN
MODEL: GC25P-5
5000LB CAPACITY
3 STAGE MAST
82 LOWERED
186 RAISED
LPG FUEL
2.4L GM VORTEC ENGINE
SMOOTH NON MARKING TIRES
FORK POSTIONER
SIDE SHIFTER
48 FORKS INCLUDED
$10900 EACH
2 AVAILABLE
2008 HYSTER S60FT For Sale In
CALL 1.888.745.0577 FOR PRICE
YEAR: 2008
MAKE: HYSTER
MODEL: S60FT
6000LB CAPACITY
3 STAGE MAST
83” LOWERED
188” RAISED
MAZDA ENGINE
LPG FUEL
SMOOTH CUSHION TIRES
4 WAY VALVE WITH LEVER
3 WAY PLUMBED TO CARRIAGE FOR FUTURE SIDE SHIFTER
42” FORKS INCLUDED
GIVE US A CALL AT 1.888.745.0577 FOR PRICE
2005 TOYOTA 7FGCU35
YEAR: 2005
MAKE: TOYOTA
MODEL: 7FGCU35
8000LB CAPACITY
3 STAGE MAST
92” LOWERED
198” RAISED
LPG FUEL
GM VORTEC 4.3L V6 ENGINE
TRACTION CUSHION TIRES
SIDE SHIFTER
42” FORKS INCLUDED
$15900
YEAR: 2000
MAKE: KOMATSU
MODEL: FG45T-6
10000LB CAPACITY
3 STAGE MAST
91” LOWERED
188” RAISED
NISSAN ENGINE
GASOLINE FUEL (CAN BE CONVERTED TO NEW LPG SYSTEM FOR $1500)
DUAL DRIVE PNEUMATIC TIRES
SIDE SHIFTER INCLUDED
42” FORKS
$16900
CALL US TODAY!
YEAR: 2008
MAKE: CATERPILLAR
MODEL: P5000
5000LB CAPACITY
2 STAGE MAST
83” LOWERED
131” RAISED
LPG FUEL
NISSAN ENGINE
SOLID PNEUMATIC TIRES
PARTIAL CAB WITH HEAT, WIPERS AND LIGHTS
SIDE SHIFTER
42” FORKS INCLUDED
$15900
Genie lifts safely design, build, sell and service the highest valued lifting equipment in the industry. Genie lifts set the standard for performance and durability.
Rising Above Expectations
When you choose Genie® products, you get more than equipment designed for reliability, easy operation, convenient service and uncompromising safety. You also get tailored service and support from a team that understands your challenges. We believe our job is to make your business better. From scissor lifts and telehandlers to telescopic and articulating booms, you can count on Genie equipment to help improve your bottom line.
Many Industries, One Goal: Your Success
Genie® products are used in a wide range of industries on jobsites and in facilities around the world. Our versatile booms, lifts and more are the right choice for many applications —including anywhere you need to lift workers, tools and materials to get the job done.
Aviation and Ports
Genie equipment performs dependably in a variety of demanding aviation and shipyard applications. From moving cargo to high-reach maintenance work, there’s a model for the job.
Construction
Indoors and out, during nearly every phase of construction, there’s an application for a Genie machine. Our signature blue lifts have been used for decades to erect building structures of all types.
Entertainment
We pioneered booms and equipment custom designed for studios, locations and special events. The Entertainment category includes Terex® light towers and Genie lifts in non-reflective finishes for shooting at heights.
Government and Military
Genie designs, manufactures, services and supports highly specialized aerial products for government and military applications. Our world-class engineers and experienced team lead the field in developing proven solutions for your specific needs.
Industrial
Genie scissor lifts, articulating booms and manually propelled lifts are used in industrial applications from maintenance to manufacturing. We partner with the world’s leading innovators for OEM applications and products designed specifically for unique needs.
Warehouse and Retail
There is a reason most of the world’s largest retailers chose Genie lifts. We offer a complete selection of lifts from manually operated to electric models with capacity and safety features that go from high-volume warehouse to city-center retail.
New Equipment
Our goal is to earn our customers’ business with responsive support —
delivered where and when they want it.
Genie Industries was founded in 1966 when Bud Bushnell bought the manufacturing rights to a material lift that operated on compressed air. Customers seemed to be impressed with the “magic in the bottle” that was used to raise and lower the hoist, and hence the “Genie” name was born.
Over time, with growing demand for work lifts and platforms, Genie expanded operations and established itself in new markets. Since then, products such as man-lifts, stick booms, articulated booms, light towers, and telehandlers have been added to the Genie® product line.
By the early 2000s, due to the economic downturn, the company decided to seek a partner that held the same values. Terex Corporation, with a history of acquiring equipment manufacturers worldwide proved a good match for the business. In 2002, Genie Industries was sold and became a part of Terex.
During the years following the sale, due to its strength and reputation in the marketplace, it was determined to maintain the Genie® brand within the Terex Aerial Work Platforms (AWP) segment of Terex. Hence, all Genie® machines continue to be sold under the Genie® brand.
Genie is dedicated to minimizing waste, improving quality, listening to our customers and providing outstanding support long after the sale. These strategies have made Genie a trusted brand for decades, and they’re helping us break new ground today.
Articulating Boom Lifts, Attachments, Boom Lift, Container Handlers, Cushion Forklifts, Electric Boom Lifts, Electric Scissor Lifts, Electric-Forklifts, forklift, Forks, Komatsu Forklift Reviews, Manlifts, Multi Directional Forklifts, Narrow Aisle Forklifts, Order Pickers, Pallet Jacks, Pneumatic Forklifts, Reach Trucks, Rough Terrain Forklifts, Rough Terrain Scissor Lifts, Straight Boom Lifts, Telehandlers, Toyota Forklift Reviews and Features – www.chicagoliftequipment.com, chicagoliftequipment.com, chicago lift equipment, lift equipment for sale.
- New Equipment
- Boom Lifts
- Trailer Mounted Booms
- Scissor Lifts
- Aerial Work Platforms
- Vertical Mast Lifts
- Telehandlers
- Material Lifts
- Light Towers
- Bridge Inspection Platforms
- Used Equipment
- Industries
- Merchandise
- Literature
Clark Forklifts & Material Handling Equipment For Sale
Presently, there are over 250,000 CLARK lift trucks operating in North America and 350,000 units operating worldwide.
Worldwide, CLARK has one of the broadest product lines in the industry with five major lines. Trucks ranging from 1,500 to 18,000 pound capacities, LPG, gasoline, dual fuel, diesel, narrow-aisle stackers, electric riders and powered hand trucks.
Parts Distribution – CLARK has state-of-the-art parts distribution warehouses in Louisville, Kentucky and Changwon, South Korea. The parts warehouses are centrally located to service all of CLARK’s dealers and customers.
Your CLARK Dealer is your local source for all your parts needs through CLARK TOTALIFT®. Availability of parts through CLARK TOTALIFT®, covers over 120,000 items specifically built for 20 different brands of lift trucks and other industrial equipment.
For the past nine decades, CLARK has been one of the industry’s most progressive and responsive manufacturers, continuously seeking innovative ways to improve product, expand service and provide value to its customers.
CLARK currently has one of the largest dealer support networks in the material handling industry in North America, boasting over 230 locations. We have over 550 locations worldwide with dealer representation in more than 80 countries.
CLARK continues to be an industry leader with innovative product development, including safety features such as the operator restraint system, pioneered by CLARK and adopted as a standard feature on all forklift trucks.
ISO 9001 — CLARK, the first forklift manufacturer in the world to be certified in compliance with the internationally accepted quality standard ISO 9001 for all its forklift manufacturing plants worldwide. CLARK’s on-going commitment is to have the Number 1 Quality system in the industry.
ISO 14001 — CLARK’S Korean facility acquired its ISO 14001 (Environmental Management System) certificate in 2001. This places CLARK in a dominant position in the market to be prepared for any environmental restrictions.
Lean Manufacturing — CLARK adopted the highly successful and efficient system of “Lean Manufacturing” for its assembly plants, and has completed the transition of its Korean plant. “Lean Manufacturing” was developed to ensure the most efficient and effective method of manufacturing plant management and use of resources. COPS (Clark Optimized Production System) focuses not only on production efficiencies, but also on quality of product and services.
Engineering — Through CLARK’s new product development and value engineering program, product engineers and suppliers work together to minimize costs and, at the same time, improve the quality and efficiency of our products.
Internal Combustion Pneumatic Tire Lift Truck
LPG/DIESEL
13,500 / 15,500 / 16,500 / 18,000 lbs
(6000 / 7000 / 7500 / 8000 kg)
(6000 / 7000 / 7500 / 8000 kg)
Applications:
Yard Applications in Heavy Manufacturing, Stevedoring & Warehousing, Building Materials Handling
Features & Options:
(roll over a highlighted area to see more)
With the combination of a 100 HP engine, fully automatic 3-speed transmission, wet disc brakes and rugged chassis design, the GEN2 C60 provides the exceptional performance, maneuverability and durability in its class that you’ve come to expect from CLARK.
Internal Combustion Pneumatic Tire Lift Truck
LPG/DIESEL
8000 / 9000 / 10,000 / 11,000 lbs
(4000 / 4500 / 5000 / 5500 kg)
(4000 / 4500 / 5000 / 5500 kg)
Applications:
Manufacturing, Warehousing, Building Materials Handling
Features & Options:
(roll over a highlighted area to see more)
The NEW GEN2 C40-series is designed to tackle any task placed in its path. The open-core, plate-fin radiator provides maximum cooling of the engine and transmission in the harshest environments and the most demanding applications
Internal Combustion Pneumatic Tire Lift Truck
LPG/DIESEL
4000 / 5000 / 6000 / 7000 lbs
(2000 / 2500 / 3000 / 3300 kg)
(2000 / 2500 / 3000 / 3300 kg)
Applications:
Manufacturing, Warehousing, Beverage/Bottling and Trucking
Features & Options:
(roll over a highlighted area to see more)
The GEN2 C20-series proudly adds to CLARK’s unique history of building the best forklifts with evolutionary steps in ergonomics, power, safety, durability, and performance. These models, designed for distribution, manufacturing and warehousing of all types, are suited for the toughest applications.
Internal Combustion Pneumatic Tire Lift Truck
LPG/DIESEL
4000 / 5000 / 6000 lbs
(2000 / 2500 / 3000 kg)
(2000 / 2500 / 3000 kg)
Applications:
Indoor/Outdoor Manufacturing, Warehousing, Beverage/Bottling
Features & Options:
(roll over a highlighted area to see more)
The CQ20-Series proudly adds to CLARK’s unique history of building dependable forklifts. No frills design with proven, long lasting components provide long life and simplified maintenance in distribution, manufacturing and warehousing of all types, indoors or out.
Internal Combustion Pneumatic Tire Lift Truck
LPG/DIESEL
3000 / 3500 / 4000 lbs
(1500 / 1800 / 2000 kg)
(1500 / 1800 / 2000 kg)
Applications:
Manufacturing, Warehousing, Recycling, Beverage/Bottling and Trucking
Features & Options:
(roll over a highlighted area to see more)
The Gen2 C15-Series proudly adds to CLARK’s unique history of building the best forklifts with evolutionary steps in ergonomics, power, safety, durability and performance. These narrow-width models, designed for distribution, manufacturing and warehousing of all types, are suited for the toughest applications.
Internal Combustion Cushion Tire Lift Truck
LPG
13,500 / 15,500 lbs
(6000 / 7000 kg)
(6000 / 7000 kg)
Applications:
Manufacturing, Paper Roll Handling, Processing Mills & Machinery Movers
Features & Options:
(roll over a highlighted area to see more)
The CGC40/70-series proudly adds to CLARK’s unique history of building the best forklifts with evolutionary steps in ergonomics, power, safety, durability, and performance. These models, designed for distribution, manufacturing and warehousing of all types, are suited for the toughest applications.
Internal Combustion Cushion Tire Lift Truck
LPG
8000 / 10,000 / 12,000 lbs
(4000 / 5000 / 5500 kg)
(4000 / 5000 / 5500 kg)
Applications:
Manufacturing, Paper Roll Handling, Processing Mills & Machinery Movers
Features & Options:
(roll over a highlighted area to see more)
The CGC40/70-series proudly adds to CLARK’s unique history of building the best forklifts with evolutionary steps in ergonomics, power, safety, durability, and performance. These models, designed for distribution, manufacturing and warehousing of all types, are suited for the toughest applications.
Internal Combustion Cushion Tire Lift Truck
LPG
4000 / 5000 / 6000 / 6500 lbs
(2000 / 2500 / 3000 / 3200 kg)
(2000 / 2500 / 3000 / 3200 kg)
Applications:
Manufacturing, Warehousing, Beverage/Bottling and Trucking
Features & Options:
(roll over a highlighted area to see more)
The GEN2 C20-series proudly adds to CLARK’s unique history of building the best forklifts with evolutionary steps in ergonomics, power, safety, durability, and performance. These models, designed for distribution, manufacturing and warehousing of all types, are suited for the toughest applications.
Internal Combustion Cushion Tire Lift Truck
LPG
3000 / 3500 / 4000 lbs
(1500 / 1800 / 2000 kg)
(1500 / 1800 / 2000 kg)
Applications:
Manufacturing, Warehousing, Recycling, Beverage/Bottling and Trucking
Features & Options:
(roll over a highlighted area to see more)
The Gen2 C15-Series proudly adds to CLARK’s unique history of building the best forklifts with evolutionary steps in ergonomics, power, safety, durability and performance. These narrow-width models, designed for distribution, manufacturing and warehousing of all types, are suited for the toughest applications.
Four Wheel Sit-Down Solid Pneumatic Tire Lift Truck
100% AC Electric 80 Volt
8000 / 9000 / 10000 lbs
(4000 / 4500 / 5000 kg)
(4000 / 4500 / 5000 kg)
Applications:
Indoor/Outdoor Manufacturing, Warehousing & Shipping/Receiving
Features & Options:
(roll over a highlighted area to see more)
In the past, one truck would be used for outdoor applications and another truck would be used for indoor warehousing. Now one GEX can handle both environments, leaving you with the thought… two “hands” aren’t always better than one.
Three-Wheel Tow Tractor
100% AC Electric 48 Volt
8800 / 15,400 lbs
(4000 / 7000 kg)
(4000 / 7000 kg)
Applications:
Indoor/Outdoor Manufacturing, Warehousing & Shipping/Receiving
Features & Options:
(roll over a highlighted area to see more)
The reinforced all steel frame, solid pneumatic tires, large drum brakes, and optional weather enclosure ensures that the CLARK CTX 3-wheel Tow Tractor operates with the same ease of use, flexibility, and rugged durability that has been at the center of CLARK’s manufacturing of material handling trucks for nearly 100 years.
Four Wheel Sit-Down Cushion Tire Lift Truck
100% AC Electric 36 or 48 Volt
4000 / 5000 / 6000 / 6500 lbs
(2000 / 2500 / 3000 / 3000 kg)
(2000 / 2500 / 3000 / 3000 kg)
Applications:
Manufacturing, Warehousing, Bottling & Shipping/Receiving
Features & Options:
(roll over a highlighted area to see more)
The CLARK ECX series of electric lift trucks is the ideal choice for demanding manufacturing and distribution applications. Superior ergonomic design, operator comfort and safety and outstanding truck performance are backed by the oldest name in lift trucks.
Four Wheel Sit-Down Solid Pneumatic Tire Lift Truck
100% AC Electric 80 Volt
4000 / 5000 / 6000 lbs
(2000 / 2500 / 3000 kg)
(2000 / 2500 / 3000 kg)
Applications:
Indoor/Outdoor Manufacturing, Warehousing & Shipping/Receiving
Features & Options:
(roll over a highlighted area to see more)
In the past, one truck would be used for outdoor applications and another truck would be used for indoor warehousing. Now one GEX can handle both environments, leaving you with the thought… two “hands” aren’t always better than one.
Four Wheel Sit-Down Solid Pneumatic Tire Lift Truck
100% AC Electric 36 or 48 Volt
3200 / 3600 / 4000 lbs
(1600 / 1800 / 2000 kg)
(1600 / 1800 / 2000 kg)
Applications:
Indoor/Outdoor Manufacturing, Warehousing & Shipping/Receiving
Features & Options:
(roll over a highlighted area to see more)
In the past, one truck would be used for outdoor applications and another truck would be used for indoor warehousing. Now one GEX can handle both environments, leaving you with the thought… two “hands” aren’t always better than one.
IC – Pneumatic
IC – Cushion
Electric
Narrow Aisle
Walkie Stackers
Walkie Pallet
C60/70/75/80
13,500 – 18,000 lbs [6000 – 8000 kg]
13,500 – 18,000 lbs [6000 – 8000 kg]
C40/45/50s/55s
8000 – 11,000 lb [4000 – 5500 kg]
8000 – 11,000 lb [4000 – 5500 kg]
C20/25/30/35 GEN2
4000 – 7000 lbs [2000 – 3300 kg]
4000 – 7000 lbs [2000 – 3300 kg]
CQ20/25/30
4000 – 6000 lbs [2000 – 3000 kg]
4000 – 6000 lbs [2000 – 3000 kg]
C15/18/20S GEN2
3000 – 4000 lbs [1500 – 2000 kg]
3000 – 4000 lbs [1500 – 2000 kg]
CGC 60/70
13,500 – 16,500 lbs [6000 – 7000 kg]
13,500 – 16,500 lbs [6000 – 7000 kg]
CGC 40/50/55
8000 – 12,000 lbs [4000 – 5500 kg]
8000 – 12,000 lbs [4000 – 5500 kg]
C20C/25C/30C/32C GEN2
4000 – 6500 lbs [2000 – 3200 kg]
4000 – 6500 lbs [2000 – 3200 kg]
C15C/18C/20SC GEN2
3000 – 4000 lbs [1500 – 2000 kg]
3000 – 4000 lbs [1500 – 2000 kg]
GEX 40/45/50
8000 – 10000 lbs [4000 – 5000 kg]
8000 – 10000 lbs [4000 – 5000 kg]
CTX 40/70
8800 – 15,400 lbs [4000 – 7000 kg]
8800 – 15,400 lbs [4000 – 7000 kg]
ECX 20/25/30/32
4000 – 6500 lbs [2000 – 3200 kg]
4000 – 6500 lbs [2000 – 3200 kg]
GEX 20/25/30
4000 – 6000 lbs [2000 – 3000 kg]
4000 – 6000 lbs [2000 – 3000 kg]
GEX 16/18/20
3200 – 4000 lbs [1600 – 2000 kg]
3200 – 4000 lbs [1600 – 2000 kg]
GTX 16/18/20
3200 – 4000 lbs [1600 – 2000 kg]
3200 – 4000 lbs [1600 – 2000 kg]
TMX 12/15S/15/17/20/25
2500 – 5000 lbs [1250 – 2270 kg]
2500 – 5000 lbs [1250 – 2270 kg]
OSX 15
3000 lbs [1360 kg]
3000 lbs [1360 kg]
ESX12/15S/15/17/20/22/25
2500 – 5000 lbs [1250 – 2270 kg]
2500 – 5000 lbs [1250 – 2270 kg]
Turret Truck
6000 lbs [3000 kg]
6000 lbs [3000 kg]
NPR 15D/17/20/22 NSR 22/25
3000 – 5000 lbs [1350 – 2275 kg]
3000 – 5000 lbs [1350 – 2275 kg]
CSM 7/10/15
3000 – 4000 lbs [1365 – 1815 kg]
3000 – 4000 lbs [1365 – 1815 kg]
CST 10/15/20
2200 – 4000 lbs [1000 – 1815 kg]
2200 – 4000 lbs [1000 – 1815 kg]
CS 15/20 CSP 15
3000 lbs [1365 kg]
3000 lbs [1365 kg]
PWX 30/40 HWX 30/40
6000 – 8000 lbs [2720 – 3630 kg]
6000 – 8000 lbs [2720 – 3630 kg]
EWP 45
4500 lbs [2045 kg]
4500 lbs [2045 kg]
EWP 30
3000 lbs [1360 kg]
3000 lbs [1360 kg]
Linde Forklifts & Material Handling Equipment For Sale
LMH-NA has been a fixture in the North American transportation and material handling equipment market for over 150 years. Our roots extend back beyond the days of our industry. As a technology and manufacturing pioneer, we played an instrumental role in the early evolution of the lift truck.
Today we continue to set the pace in our industry. Linde Material Handling ranks among the world’s leading lift truck manufacturers. A justly earned position. Linde trucks excel not only with their recognized innovative technologies, but especially due to their low energy and operating costs.
New at Linde: Linde in the Spot Lights
Linde Products
The Linde Range of
Industrial Trucks
Industrial Trucks
Linde supplies complete
and optimum answers for every materials handling requirement – forklift trucks driven by combustion engine or electric motor, sideloaders, order pickers, tractors, high-level stackers and reach trucks.
and optimum answers for every materials handling requirement – forklift trucks driven by combustion engine or electric motor, sideloaders, order pickers, tractors, high-level stackers and reach trucks.
Linde Products > Class I > 346
Linde 346 – E18 / E20
- AC technology
- Low maintenance cost and effort
- Designed-in durability
- Fast acceleration for better productivity
- Precise maneuvering
- Quick directional changes
| AC drive & load handling systems, transistorized AC controllers |
| Dual “in-line” AC motor drive axle |
| On-demand AC proportional hydraulics & steering pump |
| Clear view mast & fork carriage, hydraulically cushioned lowering |
| 36 / 48 Volt power system |
| Power modules mounted to the drive axle |
| Low lift side battery discharge |
Linde Products > Class I > 387
Linde 387 – E20P600 to E35PHL
- AC technology
- 80 Volt Power System
- Dual Motor Drive Axle
- Patented “combi” Steer Axle
- Axle Mounted Power Modules
- “Floating” Cab & Overhead Tilt Cylinders
| AC drive & load handling system |
| Dual “in-line” AC Drive Motors |
| On-demand AC proportional hydraulic and steering pump |
| Overhead tilt cylinders |
| 80 Volt Power System |
| Power Modules mounted to the drive axle |
| Neoprene Axle and tilt cylinder |
Linde 388 – E35P/600 H to E50P HL
- AC technology
- 80 Volt Power System
- Dual Motor Drive Axle
- One piece, Cast Iron, Steer Axle
- Axle Mounted Power Modules
- “Floating” Cab & Overhead Tilt Cylinders
| AC drive & load handling system |
| Dual “in-line” AC Drive Motors |
| On-demand AC proportional hydraulic and steering pump |
| Overhead tilt cylinders |
| 80 Volt Power System |
| Power modules mounted to the drive axle |
| Neoprene Axle and tilt cylinder mountings |
Linde RX60C – RX60-25C & RX60-30C
- Energy efficiency
- Linde Truck Control (LTC)
- Ergonomic excellence
- Unmatched performance
- Superb visibilty
- Floating suspension
| Ideal for indoor/outdoor applications where IC trucks are unsuitable |
| Wet disc brakes |
| Integrated diagnostic system |
| Deep-well battery compartment |
| 1,000 hr. service intervals |
| 80 volts electrical system & AC motors |
| Planetary final drives |
Linde RX60L – RX60-25L/RX60-30L & RX60-35
- Energy efficiency
- Linde Truck Control (LTC)
- Ergonomic excellence
- Unmatched performance
- Superb visibilty
- Floating suspension
| Ideal for indoor/outdoor applications where IC trucks are unsuitable |
| Wet disc brakes |
| Integrated diagnostic system |
| Deep-well battery compartment |
| 1,000 hr. service intervals |
| 80 volts electrical system & AC motors |
| Planetary final drives |
Linde RX60 – RX60-40/RX60-45 & RX60-50
- Energy efficiency
- Linde Truck Control (LTC)
- Ergonomic excellence
- Unmatched performance
- Superb visibilty
- Floating suspension
| Ideal for indoor/outdoor applications where IC trucks are unsuitable |
| Wet disc brakes |
| Integrated diagnostic system |
| Deep-well battery compartment |
| 1,000 hr. service intervals |
| 80 volts electrical system & AC motors |
| Planetary final drives |
Class II
Electric Narrow Aisle/
Very Narrow Aisle Lift Trucks and Reach TrucksWe have the active contribution to warehouse productivity with picking & storage at maximum performance!
Very Narrow Aisle Lift Trucks and Reach TrucksWe have the active contribution to warehouse productivity with picking & storage at maximum performance!
Linde 115 – R14 / R16 / R16N / R16HD / R20 / R20N & R20W
- High productivity
- Low operator cost & efficiency
- Unique design features
- Wide operator compartment
- Meets the most ardous applications
- Premium operator comfort
| Linde Digital Control (LDC) |
| Linde Load Control (LLC) |
| Shock-mounted components |
| AC motors & superior battery compartment kwh capacity |
| All-wheel braking |
| Large diameter load wheels |
| Regenerative braking |
Linde 011 – K-Modular 10 / 13 / 15
- Works efficiently in very narrow aisles
- High precision for maximum productivity
- Intuitive control console
- Comfort and safety
- Easy access
- Tailored to your individual specifications
| 3-point mast design / box sections |
| AC drive & lift motors |
| Energy recovery system |
| Forward mounted auxiliary mast |
| On-board diagnostic readout |
| All-wheel brake system |
| Triplex mast with free-lift |
Class III
Electric Warehouse (Pallet) TrucksBuilt tough for an abusive world using high-tech simplicity, and designed for exceptional performance and operator comfort.
Class IV
Internal Combustion Counterbalanced Cushion Tire Lift Trucks3,000 lbs – 6,500 lbs capacityIdeal for warehouse and other smooth surface forklift applications!
Linde 1313 – H25CT / H27CT / H30CT / H32CT
- Unrivaled performance
- Ergonomic & environmental excellence
- Time-tested durability
- Construction machinery style driving power
- Lowest total cost of ownership
- Drastically reduced maintenance expenses
| Linde hydrostatic drive |
| Pressurized hydraulic system |
| Full belly-pan construction |
| Low RPM industrial engines |
| Shock-mounted steer axle |
| Linde Truck Control (LTC) |
| All-around visibility |
Linde 391 CT – H16CDCT / H18CDCT / H20CDCT / H20CDCT-600
- Unrivaled performance
- Ergonomic & environmental excellence
- Time-tested durability
- Construction machinery style driving power
- Lowest total cost of ownership
- Drastically reduced maintenance expenses
| Linde hydrostatic drive |
| Full belly-pan construction |
| Low RPM industrial engines |
| Shock-mounted components, drive/steer axle & tilt cylinders |
| Linde Truck Control (LTC) |
| Pressurized hydraulic system |
| Overhead tilt cylinders |
Class V
Internal Combustion Counterbalanced Pneumatic Tire Lift TrucksFrom 3,000 lbs – 40,000 lbs capacity, these hydrostatic drive units are unchallenged in performance and reliability!
Special Applications
Forestry, Foundry & Recycling
Forestry, Foundry & Recycling
Linde 391 – H16DT / H18DT / H20DT
- Unrivalled performance
- Ergonomic & environmental excellence
- Time-tested durability
- Construction machinery style driving power
- Lowest total cost of ownership
- Drastically reduced maintenance expenses
| Linde hydrostatic drive |
| Full belly-pan construction |
| Low RPM industrial engines |
| Shock-mounted components, drive/steer axle & tilt cylinders |
| Linde Truck Control (LTC) |
| Pressurized hydraulic system |
| Overhead tilt cylinders |
Linde 393 – H25DT / H30DT / H35DT
- Unmatched high performance
- Operator compartment without equal
- Robust design for heavy-duty applications
- Maximum performance with assured safety
- Efficiency in its purest form
- Lowest maintenance & operating cost
| Linde hydrostatic drive |
| Full belly-pan construction |
| Low RPM industrial engines |
| Shock-mounted components, drive/steer axle & tilt cylinders |
| Linde Truck Control (LTC) |
| Pressurized hydraulic system |
| Overhead tilt cylinders |
Linde 394 – H40DT / H45DT / H50DT
- Unmatched high performance
- Operator compartment without equal
- Robust design for heavy-duty applications
- Maximum performance with assured safety
- Efficiency in its purest form
- Lowest maintenance & operating cost
| Linde hydrostatic drive |
| Full belly-pan construction |
| Low RPM industrial engines |
| Shock-mounted components, drive/steer axle & tilt cylinders |
| Linde Truck Control (LTC) |
| Pressurized hydraulic system |
| Overhead tilt cylinders |
Linde 396 – H60D / H70D / H80D / H80D-900 / H80D-1100
- Unmatched performance (powerful & agile)
- Superior ergonomics
- Designed-in durability (customer driven design)
- Ecological excellence
- Exceptional safety
- Lowest maintenance & operating costs
| Linde hydrostatic drive |
| Seam-welded full belly-pan construction |
| Low RPM industrial engines |
| Shock-mounted components |
| Built-in fail-safe brake system |
| Pressurized hydraulic system |
| Linde Torsion System (LTS) with overhead tilt cylinders |
Linde 1401 – H100D to H180D
- Masterful precision “The Gentle Giant”
- Unchallenged performance
- Reliability & durability
- Unsurpassed safety features
- Ergonomic & economic excellence
- Lowest maintenance & operating cost
| Linde hydrostatic drive with dynamic no-wear braking |
| Load sensing working hydraulics (LLC System) |
| Integral pin-type SS/FP carriages as standard equipment |
| Full tilt-back operator cab for unrestricted service access |
| Shock-mounted drive and steering axles |
| Extremely robust, heavy-duty chassis design |
| Nine model range with two load centers – 24 in. & 48 in. |
Linde | forklift | material handling equipment | lmh north america
Articulating Boom Lifts, Attachments, Boom Lift, Container Handlers, Cushion Forklifts, Electric Boom Lifts, Electric Scissor Lifts, Electric-Forklifts, forklift, Forks, Komatsu Forklift Reviews, Manlifts, Multi Directional Forklifts, Narrow Aisle Forklifts, Order Pickers, Pallet Jacks, Pneumatic Forklifts, Reach Trucks, Rough Terrain Forklifts, Rough Terrain Scissor Lifts, Straight Boom Lifts, Telehandlers, Toyota Forklift Reviews and Features – www.chicagoliftequipment.com, chicagoliftequipment.com, chicago lift equipment, lift equipment for sale
Class III
Electric Warehouse (Pallet) TrucksBuilt tough for an abusive world using high-tech simplicity, and designed for exceptional performance and operator comfort.
| CAT® LIFT TRUCKS |
| With load capacities ranging from 2,500 to 36,000 lbs., Cat Lift Trucks product offerings consist of electric counterbalanced cushion and pneumatic tire lift trucks as well as internal combustion cushion and pneumatic tire forklifts. With a dedicated focus on quality, reliability and customer service, Cat Lift Trucks offers innovative material handling solutions. |
 Class I – Electric Counterbalanced |
 Class IV – Internal Combustion Cushion Tire
|
 Class V – Internal Combustion Pneumatic Tire
|
 Hand Pallet
|
||||||||||||||||||
| Cat® lift truck dealers carry a complete line of material handling equipment to meet your needs. If your application requires Class I Counterbalanced Trucks; Class II Reach Trucks or Order Pickers; or Class III Pallet Trucks, Walkie Stackers or Tow Tractors | |||||||||||||||||||||
| Products |
| Cat Lift Trucks offers a wide range of durable forklifts designed to handle your specific material handling applications. We know you demand uncompromising quality from productive forklifts that maximize uptime and get the job done efficiently. Our rugged lift trucks deliver day after day by providing you with all the ownership benefits you’ve come to expect from Cat® lift trucks. |
 |
Cat Lift Trucks With load capacities ranging from 2,500 to 36,000 lbs., Cat Lift Trucks line of material handling equipment includes electric forklifts as well as internal combustion cushion and pneumatic tire forklifts. Built for diverse commercial and industrial applications, Cat lift trucks set the standard for the ultimate forklift experience. Learn More About Our Line Of Forklifts. |
 |
Forklift Parts Whether you’re managing a few lift trucks or an entire fleet, you need quick access to the right parts. Our forklift parts programs allow you to keep your costs down and your lift trucks running at peak productivity. Learn More About Our Forklift Parts Programs. |
 |
Rental And Used Forklifts Our top-rated dealer network is ready to serve your rental and used forklift needs, whether you’re looking for a diesel, electric or LP powered pneumatic or cushion tire lift truck. Flexible rental periods can range from one day to one month to years. Learn More About Our Rental and Used Forklift Equipment. |
2,500-4,000 lb Capacity 3-Wheel Pneumatic Tire
2ET2500-2ET4000, Cat 3-wheel, Cat electric forklift, electric 3-wheel forklift
Combining the latest in operator ergonomics, advanced AC control systems and customized performance, the 2ET2500-2ET4000 Series three-wheel electric forklifts are up to any application challenge. Electric motors protected to IP54 and specially designed options such as operator cabins allow these lift trucks to operate in areas outside of traditional electric forklift applications.
Quality Reliability Customer Service Specs
Quality
Fully AC power steering provides significantly lower steering effort than conventional steering system
Standard fingertip controls offer precise control; a travel directional switch and horn are conveniently integrated into the fingertip module
Easy-to-read, cowl-mounted display panel includes information on service icons, directional indicators and performance modes
Improved visibility in all directions due to mast, overhead guard and counterweight design
Designed to maximize operator comfort and minimize fatigue:
Full-suspension seat and fully-floating cab design help reduce shock and vibration
Narrow steering column allows for ample leg room and can be adjusted in two planes – height and proximity
Anti-cinch seat belt permits the operator to turn easily when travelling in reverse
Available Options
Joystick control
Operator cab
Light and strobe packages for your specific application
3,000-6,500 lb Capacity LP Gas Cushion Tire
gas cushion tire forklift, gas Cat lift truck,
These rugged, compact lift trucks come with fuel-injected purePower® engines that provide excellent horsepower and torque in hard-working material handling environments. The fuel management system optimizes fuel economy and extends tire life with the Fuel Saver Mode while meeting EPA and CARB requirements for carbon monoxide (CO), hydrocarbons (HC) and nitrogen oxide (NOx) emissions.
Quality Reliability Customer Service Specs
Quality
LED front work lights and rear combination lights burn brighter and last longer than conventional lights
Floating Powertrain reduces noise and vibration from the engine, helping to reduce operator fatigue
Fully hydrostatic steer axle provides exceptionally lower steering effort than conventional steering systems
Designed to maximize operator comfort and minimize fatigue:
Full-suspension vinyl seat resists shock and vibration
Generous floor area with through-the-floor pedal design, which helps promote natural motion
Return-to-set memory tilt steering column remembers operator preferences
Ergonomic controls are conveniently placed for easy access
Anti-cinch seat belt permits the operator to turn easily when travelling in reverse
Available Options
Swing down LP tank bracket – helps significantly reduce the effort it takes for an operator to change an LP tank
Seat and seatbelt ignition interlock – engine will not run unless the operator is in the seat with the seat belt fastened
Rear handle with horn button – better operator support when driving in reverse
Light and strobe packages for your specific applications
3,000-7,000 lb Capacity Internal Combustion Pneumatic Tire
Cat pneumatic, 2P3000-2P7000, 2PD4000-2PD7000, Cat forklift, Cat lift truck
These heart-of-the-line forklifts are built for harsh, rugged applications, without sacrificing operator comfort and convenience. With an advanced on-board diagnostic system, ground speed control and the Fuel Saver Mode, the 2P3000-2P7000/2PD4000-2PD7000 series provides dependable material handling performance with a highly-efficient fuel system for optimum productivity.
Quality Reliability Customer Service Specs
Quality
Presence Detection System (PDS) helps protect operators and loads by disengaging transmission and hydraulic functions when the operator leaves the normal seated position or the parking brake is not set
LED front work lights and rear combination lights burn brighter and last longer than conventional lights
Floating Powertrain reduces noise and vibration from the engine, helping to reduce operator fatigue
Fully hydrostatic steer axle provides exceptionally lower steering effort than conventional steering systems
Informative LED/LCD display panel is mounted to the steering column and keeps operators informed
Designed to maximize operator comfort and minimize fatigue:
Full-suspension vinyl seat resists shock and vibration
Generous floor area with through-the-floor pedal design, which helps promote natural motion
Return-to-set memory tilt steering column remembers operator preferences
Ergonomic controls are conveniently placed for easy access
Available Options
Fingertip hydraulic controls – offer precise control with near effortless motion
Full-suspension swivel seat – turns 12° to the right, allowing more natural movement for the operator when traveling in reverse
Swing down LP tank bracket – helps significantly reduce the effort it takes for an operator to change an LP tank
Seat and seatbelt ignition interlock – engine will not run unless the operator is in the seat with the seat belt fastened
Closed operator cab – provides operator protection against the elements
Rear handle with horn button – better operator support when driving in reverse
Light and strobe packages for your specific applications
People. Products. Productivity.™ Put the Yale team to work for you
Welcome, and thank you for visiting our Yale Materials Handling Corporation website. We hope you find what you need, however, if you require any additional information, please do not hesitate to contact us.
You might not know it, but Yale is one of the oldest, original manufacturers of lift trucks in the world, having been in the business of lifting for over 137 years! We have learned a lot in so many years of helping customers solve materials handling challenges, and it is our goal – every day – to continue improving, providing you with the solutions you need, how and when you need them.
Our tagline, “People. Products. Productivity.™” sums up the elements of business we think make us most successful. We believe it is truly a team effort that is responsible for impressive Yale history and longevity in this very demanding industry:
People
- Yale employees and our suppliers around the world are dedicated to solving challenges and helping each customer’s business run more smoothly
- Our dealers are all carefully selected to assure highly responsive, consistent service in every region of the globe
- Our customers – you – are our most important partners. Working with Yale and our dealers we believe we can deliver the best lift trucks and services possible for your business
Products
- Yale has an unrivaled heritage in the design and manufacture of a wide range of materials handling equipment, from specialty warehouse equipment to traditional counterbalanced forklift truck models, powered by electric, diesel, LPG, CNG and now hydrogen fuel cells
- We have an unwavering commitment to quality. All our global facilities have ISO registrations and use highly advanced design, manufacturing and testing methods
- We never rest on our laurels we invest in research and development to make sure we continue to solve new customer challenges and remain leaders in the industry
Productivity
- At Yale, we understand that materials handling equipment is not your business, but a means to an end a way to help you run your business more efficiently and profitably
- All of our materials handling equipment is designed to improve productivity, by allowing finished goods, components and raw materials to be handled in the most efficient manner and helping operators remain both comfortable and safe
- We believe services that support our equipment are just as important as the products themselves, so we offer parts, maintenance, financing and fleet management programs designed to maximize uptime and minimize ownership costs
Product Overview
Yale® is a leading provider of a full line of high-quality products, equipment and services, including electric, gas, LP-gas and diesel powered lift trucks, narrow aisle, very narrow aisle and motorized hand trucks. Yale® offers comprehensive Fleet Management services, as well as Yale® service, parts, financing and training.
Yale® lift trucks range in capacity from 2,000 to 36,000 pounds. With over 80 years in the material handling industry and the support of our dealer network, Yale® is dedicated to providing you with a custom solution for your material handling needs.
Pallet Trucks
Yale® pallet trucks for productive horizontal transportation. Whether loading or unloading a trailer or moving loads around a warehouse the Yale® range of electric pallet trucks are designed to make the operator’s job as easy and comfortable as possible to ensure that the warehouse is as productive as possible.
Pallet Stackers
Yale® pallet stacker for high performance in the smallest areas. From the reach stacker to the counterbalanced stacker, Yale provides a comprehensive range of stacking solutions with our line of electric pallet stackers. Each stacker forklift has been developed to optimize operations in the space required.
Order Selectors
Yale® order selectors for faster, more accurate order picking. The series of electric order selectors offer quiet, effortless operation and an abundance of features, all focused on ensuring operators can achieve faster, more accurate, order picking no matter the order selector.
Reach Trucks
The NR and NDR series of reach trucks provide more versatility, more flexibility and are available in a range of single and double reach models. These superbly designed trucks bring even greater levels of performance within easy reach.
Very Narrow Aisle Trucks
Yale very narrow aisle trucks deliver low cost of ownership. The ideal solution for high density warehouses, Yale® very narrow aisle trucks allow you to incorporate more racking into your warehouse. More racking means more pick locations, allowing a greater number of SKU’s (stock keeping units) to be stored within your warehouse.
Tow Trucks
Yale® tow tractors for horizontal transport over short and long distances. The Yale® tow tractor is an efficient and cost effective solution for line feed operations ideal for intensive manufacturing processes.
3 Wheel Electric
Ergonomically advanced and productive 3 wheel electric trucks. Versatile, highly maneuverable electric forklift trucks, fully loaded with productivity enhancing features.
4 Wheel Electric
High performance and energy efficient 4 wheel electric trucks. Yale® 4 wheel electric trucks are available in a range of voltage options in both conventional and drop battery box designs. This makes them ideal for a wide variety of demanding applications.
Internal Combustion Pneumatic Tire
Yale® ICE Pneumatic Tire forklift trucks with impressive ergonomics and high productivity. The Yale® range of Diesel and LPG internal combustion pneumatic tire forklift trucks has been designed for maximum productivity and economic fuel consumption to meet specific customer needs.
Internal Combustion Cushion Tire
Yale® ICE Cushion Tire forklift trucks designed for productivity. The Yale® range of internal combustion cushion tire forklift trucks are feature rich and have been developed specifically for high lift applications in confined areas. They deliver high levels of productivity, operator ergonomics and dependability.
High Capacity Trucks
Yale® high capacity forklifts for tough operations. Yale® high capacity forklift trucks are designed to make easy work of the hardest loads in tough working conditions. With lifting capacities ranging from 19,000 up to 36,000 lbs, Yale® high capacity forklift trucks are suitable for all heavy duty applications, and come with a variety of options.
